TECL-licensed master electricians for EV charger installation, panel upgrades, transfer switches, and whole-home electrical work across DFW. The same team that installs your generator handles your electrical — no handoffs, no subcontractors.
TECL-Licensed Master ElectriciansGenerac PowerPro Elite+ · Kohler · Champion DealerFree Estimate
Serving Fort Worth, Southlake, Keller, Frisco, Colleyville, and greater DFW
Level 1 and Level 2 home charging stations. Permit-ready installation for Tesla, Rivian, Ford, GM, and all major EV brands.
100-amp to 200-amp panel upgrades and full replacements. Required for EV chargers, generators, and high-load home additions.
Automatic and manual transfer switches for whole-home standby generators. Interlock kits also available for portable generator hookups.
Whole-home electrical inspection covering panel, wiring, outlets, grounding, and code compliance. Recommended before major home purchases or renovations.
New outlet installation, dedicated circuits, recessed lighting, dimmer switches, and smart home wiring.
Smart thermostat installation and EV-ready dedicated circuit runs for future-proofing your home's electrical system.
From Tesla Wall Connectors to universal Level 2 stations — permitted, inspected, and installed by TECL-licensed electricians.
Most home EV chargers are Level 2 (240V) — the same voltage as a dryer or oven. A licensed electrician runs a dedicated circuit from your electrical panel to the charger location, installs the unit, and schedules the city permit inspection.
The full process typically takes one day. If your panel is already 200-amp with available capacity, no additional panel work is needed. If you're on a 100-amp service or the panel is full, we'll identify that during the free assessment and quote the upgrade at the same time — one visit, one quote.
HomeSafe installs all major home charging brands — Tesla Wall Connector, ChargePoint Home Flex, Eaton, and Grizzl-E. We handle permit requirements across Tarrant, Denton, and Collin counties, including Fort Worth, Southlake, Keller, and Frisco.
Common Questions
Do I need a permit to install an EV charger at home?
Yes — in most Fort Worth and DFW municipalities, a permit is required for the dedicated circuit installation. We handle the permit application and coordinate the city inspection on your behalf.
Most DFW homes built before 1990 are still on 100-amp service. It's not enough for today's loads.
A 100-amp panel was designed for a simpler era — a refrigerator, lights, and a handful of wall outlets. Modern homes run EV chargers, multiple AC units, home offices, and standby generators. If your breakers trip regularly, or your electrician has told you there's no room for new circuits, you're likely due for an upgrade.
A 200-amp panel upgrade typically takes one to two days. We handle the permit, coordinate the brief outage window with Oncor, and restore power the same day in most cases. Ask us about financing options.
Reason 01
A Level 2 charger draws 32–50 amps continuously. Most 100-amp panels cannot support that load without an upgrade first.
Reason 02
Standby generator installation often requires dedicated circuits or a panel upgrade, especially for whole-home coverage above 22kW. We'll assess this before the generator quote.
Reason 03
If breakers trip regularly or your electrician can't fit new circuits, a replacement panel is the safer long-term fix — not more breakers in an undersized box.
A transfer switch connects your standby generator to your home's electrical panel. When the grid goes down, it automatically shifts your home to generator power within seconds. When grid power returns, it switches back.
Most electricians can install a transfer switch but don't install generators. Most generator companies subcontract the electrical work. HomeSafe does both. Our TECL-licensed master electricians handle the full installation — generator, transfer switch, gas line coordination, and panel connection — as one project, with one point of contact and one schedule. No handoffs, no waiting on a subcontractor to show up.
Not sure if your electrical system is up to code? A home electrical inspection finds problems before they find you.
We inspect your main panel, subpanels, wiring condition, grounding, GFCI protection, outlet integrity, and overall code compliance. It takes about 45 minutes and we walk you through every finding on site — in plain language, not electrician shorthand.
Common triggers: buying or selling a home, finishing a basement, adding a major appliance or EV charger, or a home that's more than 25 years old. We'll tell you what needs attention now and what can wait.
Every job is performed by a TECL-licensed master electrician. No apprentices working unsupervised on your home.
We're not an electrician who added generators to the website. We're a generator company with a licensed electrical team — built from the ground up to handle both. One call. One team. No back-and-forth between contractors.
Every job we do is permitted and inspected. You receive a completed permit card after every project — which protects your home's resale value and keeps your homeowner's insurance valid. No verbal agreements, no cut corners.
Homeowners across DFW and North Texas trust HomeSafe to keep their homes powered and their electrical systems right.
“HomeSafe did the electrical, the plumbing, and the installation of the generator in one day. They were courteous and full of information. The power was off for two hours max. Good honest people. One of the best experiences I have had in my life.”
“Fabulous product and service. Nick & Justin and team have gone above & beyond with top-notch service. They willingly disconnected and stored our unit temporarily while we had construction and reinstalled when complete. The new generator works flawlessly.”
“The HomeSafe team did an excellent job in all aspects of our generator install. The customer service, attention to detail, and continued communication before, during, and after the install was great and very much appreciated!”
193+ five-star Google reviews from homeowners across Fort Worth, Southlake, Keller, Frisco and greater DFW.
Yes. HomeSafe holds a Texas Electrical Contractor Licence (TECL). Our electricians are TECL-licensed master electricians — the highest certification level in the state.
We serve Fort Worth and the greater DFW area including Southlake, Keller, Colleyville, Frisco, Flower Mound, Argyle, Trophy Club, and surrounding Tarrant, Denton, and Collin counties.
Yes — on every job, without exception. We apply for the permit, coordinate with the city inspector, and hand you the completed permit card when the job is done. Unpermitted electrical work can void your homeowner's insurance and create issues when you sell.
Yes — and this is one of HomeSafe's core advantages. We handle the panel upgrade, transfer switch, generator installation, and gas line coordination as one project. Most customers save time and money versus hiring two separate contractors and scheduling around both.
Panel upgrades and replacements, EV charger installation, electrical safety inspections, dedicated circuits, outlet installation, recessed lighting, and smart home wiring. Call us or get a free estimate online to discuss a specific job.
Panel upgrade, EV charger, transfer switch, or full electrical inspection — HomeSafe's TECL-licensed team is in the DFW area every week. Get a free estimate, no obligation.
